E

esp32s3

Esp32 S3 DevKitC1 N16R8 project with 2x cc1101 and oled screen for cypher cc1101 project from the projecr cypher pulse ive modded for adapt to the pinout of the dev module with more pins exposed than wroom32 original board used in his project. thx for the code .ino ive used

This project provides firmware for an in-car device that connects to an OBD2 Bluetooth Low Energy (BLE) adapter and displays real-time vehicle data such as speed, RPM, engine load, and more.

Bluetooth gamepad, mouse and keyboard support for ESP32 and Raspberry Pi PicoW

Makes the BCD-0o27 a robot player that plays against a human on a connected Mini Cyberdeck 0o00 (MCD-0o00) .

A framework that serves as a basis to build your own firmware for the BalCCon 0o27 Cyberdeck.

Template to facilitate developing modules for the BCD-0o27.

Module to change settings of the BCD-0o27 in a graphical interface.

Demo how to use the SAO+ interface that makes leds attached to the interface blink.

Uses the WS2812b leds on the BCD-0o27 as a disco light.

Displays a slideshow of past BalCCon Logos.

Connects to a remote server over ssh and redirects input. Part of a challenge on BalCCon 2k23.

Demo mode for the BCD-0o27. Automatically selects predefined menus and runs some modules.

A template to make programming commands for the BalCCon Cyberdeck 0o27 (BCD-0o27) easier. Can be adapted to any ESP32 project using a console and the esp-idf framework.

Commands for the BalCCon Cyberdeck 0o27 (BCD-0o27) that allow retrieving and setting system parameters. Can be adapted to any ESP32 project using a console and the esp-idf framework.

ESP32 library for setting WiFi credentials at runtime. In addition it has cutom parameters, logger, and captive portal features. Works on esp-idf as well as on arduino-esp32

A very quick and dirty port of the Arduino sketch from the manufacturers demo projects tested it with a SUNTON 8048S050C board (5" IPS touch screen).