E

esp-idf

ESP32 library for setting WiFi credentials at runtime. In addition it has cutom parameters, logger, and captive portal features. Works on esp-idf as well as on arduino-esp32

Este proyecto contiene el firmware de un dispositivo IoT desarrollado en lenguaje C. El dispositivo se encarga de monitorizar variables ambientales como temperatura, humedad y dióxido de carbono. El firmware utiliza una librería de RTOS para gestionar las lecturas de los diferentes sensores ambientales y a la vez se encarga de controlar la apertura de una ventana por medio de un actuador lineal.

This project provides firmware for an in-car device that connects to an OBD2 Bluetooth Low Energy (BLE) adapter and displays real-time vehicle data such as speed, RPM, engine load, and more.

IoT hand gesture recognition system based on ESP32 WROOM-32 microcontroller and CJMCU-7620 (PAJ7620U2) gesture sensor. Supports webhooks, MQTT integration, and WireGuard VPN for secure IoT communication.

A set of utilities created for ESP-32 development. It is based on Espressif's IDF and uses on task and Podman.

Bluetooth gamepad, mouse and keyboard support for ESP32 and Raspberry Pi PicoW

I didn't finish the project

Home automation with an ESP32 using ESP-IDF and Home-Assistant over MQTT

Examples for a ESP32 WROOM32 using ESP-IDF

ESP32 Wi-Fi access point with webpages to enable/disable the alarm. Loud siren alarm triggered by AM312 PIR sensor.

Makes the BCD-0o27 a robot player that plays against a human on a connected Mini Cyberdeck 0o00 (MCD-0o00) .

A framework that serves as a basis to build your own firmware for the BalCCon 0o27 Cyberdeck.

Template to facilitate developing modules for the BCD-0o27.

Module to change settings of the BCD-0o27 in a graphical interface.

Demo how to use the SAO+ interface that makes leds attached to the interface blink.

Uses the WS2812b leds on the BCD-0o27 as a disco light.

Displays a slideshow of past BalCCon Logos.

Connects to a remote server over ssh and redirects input. Part of a challenge on BalCCon 2k23.

Demo mode for the BCD-0o27. Automatically selects predefined menus and runs some modules.

A template to make programming commands for the BalCCon Cyberdeck 0o27 (BCD-0o27) easier. Can be adapted to any ESP32 project using a console and the esp-idf framework.