Tags

pm-4.8-rc5

Power management fixes for v4.8-rc5

 - Fix the definition of the cpufreq-dt driver's machines table
   introduced during the 4.7 cycle that should be NULL-terminated,
   but the termination entry is missing from it (Wei Yongjun).

 - Annotate tracepoints in the runtime PM framework's core so as to
   allow the functions containing them to be called from the idle
   code path without causing RCU to complain about illegal usage
   (Paul McKenney).

qcom-arm64-defconfig-for-4.9

Qualcomm ARM64 Based defconfig Updates for v4.9

* Enable defconfig options for QDF2432

qcom-arm64-for-4.9

Qualcomm ARM64 Updates for v4.9

* Updates for MSM8916 including TSCR, SMSM/SMP2P, and MBA reserve
* Update SCM node to denote being a reset-controller
* Fix broken interrupt settings
* Add TSENS nodes for MSM8916/MSM8996
* Add DB820c support
* Add MSM8916/APQ8016 display support

qcom-dts-for-4.9

Qualcomm Device Tree Changes for v4.9

* Rework dr_mode on APQ8064 and Nexus7
* Add MSM8974 BLSP1 UART1 port
* Add AP148 SATA mapping
* Add support for LG Nexus 5 (Hammerhead)
* Fixup MSM8660/MSM8064 SPMI/MPP IRQs
* Add Nexus7 IMEM/reboot reason
* Add Honami touchscreen support
* Add TSENS support on MSM8974, APQ8064, and APQ8084
* Add APQ8060 Dragonboard PM8058 LEDs
* Rework VPH PWR REG for MSM8974

qcom-drivers-for-4.9

Qualcomm ARM Based Driver Updates for v4.9

* Silence smem probe defer messages
* Make scm explicitly non-modular
* Assorted SMD bug fixes and minor changes
* Add PM8018 RTC support

qcom-soc-for-4.9

Qualcomm ARM Based SoC Updates for v4.9

* Remove unnecessary QCOM board file

drm-intel-next-2016-09-02

- skl wm fixes (Lyude, Matt, Maarten)
- cleanup of kdev/drm_dev/i915_dev handling (David Weinehall)
- make (most) encoders take advantage of atomic states (Maarten)
- MMAP_GTT_VERSION driver param to announce that gtt mmaps are reliable (Chris)
- allow contexts on all rings (Chris)
- a few fixes (around diagnostic messages) to make BAT less noisy
- misc fixes and cleanups all over, as usual

drm-fixes-for-4.8-rc5

drm fixes for 4.8-rc5

tps65218-dcdc3-workaround

regulator: tps65218: Workaround for broken DCDC3 disable on some revisions

tps65218-ver-check

mfd: tps65218: Add hardware version check

This will be used for quirks by some function drivers.

topic/drm-misc-2016-08-31

mac80211-for-davem-2016-08-30

Three little fixes:
 * revert a recent wext patch, which Ben Hutchings noticed was
   wrong, and it turns out not to be necessary for any driver

 * fix an infinite loop that can occur under certain conditions
   in mac80211's TDLS code (depending on regulatory information)

 * add a cfg80211_get_station() static inline when cfg80211 isn't
   built, to allow other modules to not have to depend on it for it

wireless-drivers-for-davem-2016-08-29

wireless-drivers fixes for 4.8

ath9k

* fix regression in client mode beacon configuration
* fix a station pointer which resulted in spurious crashes

mwifiex

* fix large amsdu packets causing firmware hang

brcmfmac

* fix deadlock when removing interface
* fix use of mutex in atomic context

v4.8-rc4

Linux 4.8-rc4

drm-fixes-for-4.8-rc4

v3.10.103

This is the 3.10.103 stable release

sound-4.8-rc4

sound fixes for 4.8-rc4

Here are a bunch of fixes as you can see in diffstat.  One core change
in ASoC is about the unexpected unbinding error, and   The rest are
wide-spread driver-specific fixes: a series of LINE6 USB fixes, a
HD-audio quirk, and various ASoC fixes including OMAP boot fixes and
Intel SKL fixes.

iommu-fixes-v4.8-rc3

IOMMU Fixes for Linux v4.8-rc3:

From Will Deacon:

	* Fix a couple of thinkos in the CMDQ error handling and
          short-descriptor page table code that have been there since
          day one

	* Disable stalling faults, since they may result in hardware
          deadlock

	* Fix an accidental BUG() when passing disable_bypass=1 on
          the cmdline

asoc-fix-v4.8-rc4

ASoC: Fixes for v4.8

A clutch of fixes for v4.8.  These are mainly driver specific, the most
notable ones being those for OMAP which fix a series of issues that
broke boot on some platforms there when deferred probe kicked in.
There's also one core fix for an issue when unbinding a card which for
some reason had managed to not manifest until recently.

iio-for-4.9a

First round of new features, device support and cleanups for IIO in the 4.9 cycle.

Device support

* ak8974
  - New driver and bindings for this 2009 vintage magnetometer (it was very
    popular back then!)
* atlas-ph-sensor
  -  ORP sensor support(I had to look up what one of these was)
* cio-dac
  - New driver for Measurement Computing DAC boards
* dmard06
  - New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
  - New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
  - max6675 and max31855 new driver
* mt6577 auxdac
  - new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
    hardware.
* ti-adc161s626
  - new driver for this TI single channel differential ADC.
* vcnl4000
  - support vcnl4010 and vcnl4020 which are compatible for all features
    currently supported by this driver.

New features

* Core
  - Allow retrieving of underlying iio_dev from a callback buffer handle.
    This is needed to allow client drivers to perform operations such as
    configuring the trigger used.
* hid-sensors
  - asynchronous resume support to avoid really long resume times.
* kxcjk-1013
  - add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
  - lsiio now enumerates processed as well as raw channels.

Cleanup

* ad7298
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
* ad7793
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
* ade7854
  - checkpatch fixups (alignment of parameters)
* atlas-ph-sensor
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
  - Switch to REGCACHE_NONE as there are no useful register to cache.
* bma180
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
* hdc100x
  - Add mention of the HDC1000 and HDC1008 to the Kconfig help text.
* isl29018
  - Add driver specific prefixes to defines and function names.
  - Remove excessive logging.
  - Drop newlines which add nothing to readability.
  - General tidying up of comments.
  - Drop I2C_CLASS_HWMON as irrelevant to driver.
* isl29028
  - Add driver specific prefixes to defines, enums and function names.
  - Drop comma's from available attribute output as not ABI compliant.
  - Drop I2C_CLASS_HWMON as irrelevant to driver.
* kxsd9
  - devicetree bindings.
* mag3110
  - This one wasn't locking to protect against mode switches during
    raw_reads.  Use the iio_claim_direct_mode function to fix this buglet.
* maxim-theromcouple
  - Fix missing selects for triggered buffer support in Kconfig.
* nau7802
  - Use complete instead of complete_all as only one completion at a time.
* sx9500
  - Use complete instead of complete_all as only one completion at a time.
* us5182d
  - Add a missing error code asignment instead of checking the result of
    an already checked statement.
* vcnl4000
  - Use BIT macro where appropriate.
  - Refactor return codes in read_raw callback.
  - Add some missing locking for concurrent accesses to the device.